915 û 928 MHz frequency-hopping technology
Internal antenna Built-in diagnostic mode for easy maintenance 5 yr battery life (standard) or 8 yr battery life (economy) Black ABS case and polycarbonate crystal FCC Compliant |
- Built-in repeater receives and retransmits clock sync signal
- 915 û 928 MHz frequency hopping technology - Internal antenna - Built-in diagnostic mode for easy maintenance - 5 yr battery life (standard) or 8 yr battery life (economy) - Black ABS case and polycarbonate crystal - Optional double mount housing available (see CL-DMA16) - Battery Life: 5 years (normal mode), 8 years (economy mode) using (2) Duracell Procell ôDö Batteries (not included). Note: standard alkaline batteries can be used but will have a slightly shorter battery life - Clock Dimensions: 16.7? (423mm) outer diameter, 2.6? (66mm) depth - Movement Dimensions: 7.32? x 3.46? x 1.81? (186mm x 88mm x 46mm) - Shipping Weight: 4.5 lbs (2.04 kg) - Temperature: 32¦F to 90¦F (0¦C to 32¦C) - Humidity: 5% to 95% non-condensing - Time Base: Quartz automatic calibration - Input Sensitivity: -103 dBm - Operating Sensitivity: 915-928 MHz frequency hopping technology - Transmitter (Repeater) Power Output: 0.25 Watt (8 dBm), transmits up to 500 ft in open space - Compliance: FCC compliant, part 15, section 15,247 (no license required) - Color: Black - Dial: Durable polystyrene material - Case: Smooth surface ABS case - Crystal: Shatterproof, side molded polycarbonate crystal - Mounting Kit Includes: (2) plastic anchors, (2) 10 x 1.5? sheet metal screws, (1) 4mm threaded 10mm length screw (attached to bracket), (1) mounting bracket, (1) knurled nut, (1) battery cover screw |
- Ringing Phone or TTY indication for the hearing impaired
- Ringing phone indication in loud warehouses and factories - Emergency illumination for emergency phones in elevators, campuses, hallways, parking ramps, etc. - Alarm indication for security systems or alarm panels with phone dialers - Durable polycarbonate lens - High output long life LED technology - Four programmable flash patterns: - Single Flash - Double Flash - Quad Flash - Flicker Flash - 6 programmable beacon and strobe brightness settings - Immune to shock and vibration - Flush mount or surface mount with weatherproof single gang box (included) - 3/4ö knockouts for connecting conduit, etc. - Strobe and control module may be installed separately - Can be configured to signal: ringing, off-hook, a combination of both ringing and off-hook (line in-use), or triggered from a contact closure - One set of (NO) normally open and (NC) normally closed relay contacts provided - Selectable ring cadence mode (strobe light will remain flashing between rings) - Switched 12V DC output (follows relay activation for powering strobe lights, cameras, etc.) - On/off switches for ring detection and off-hook/loop detection - Disable input, ideal for use with two-button emergency phones like VikingÆs E-1600-20A (DOD# 215), will not activate strobe light on ôInfoö calls - Power: 120V AC to 12V DC adapter provided - Maximum Power Supply Run Length on CAT-5: 1 pair = 125 ft, 2 pair = 225 ft, 3 pair = 325 ft, 4 pair = 475 ft - Maximum SL-2 Wire Run Length on CAT-5: 3 wires = 100 ft, 6 wires = 300 ft - Strobe Dimensions: 111mm diameter x 69mm (4.38 |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |