Shop by Brand: VALCOM

Valcom 16inch, 24VDC Round Wired Analog Clock
Microprocessor based movement
- 2 or 3 wire correction
- Automatic communications protocol identification for: Valcom 2 wire digital protocol; synch-wire 59th minute correction; synch-wire 58th minute correction; synch-wire national time and rauland
- Diagnostic leds for ease of maintenance
- Fully automatic plug and play--no settings required
- Built-in self-test function
- Automatic polarity detection
- Quick correction
- Energy efficient
- UTP connectivity
- Plug in molex connectors
- Low profile
- Metal case with polycarbonate crystal
- Made in USA
- UL, CUL, and FCC approved

- Valcom 2.5" digital clock
- 110 vac/24V
- Bar display digital clock
- 4 Digit display
- State-of-the-art timepiece
- Exclusive, high efficiency, super-bright LED display
- Immediate corrections for time change
- Unique, specially molded anti-glare front filter gives a smooth surface with no visible external screws, allowing for perfect reading
- 110V clocks may not be connected with UTP wiring

- Valcom clock control card for use with the V-2928 option card
- Provides clock control for synch wire correction, two-wire digital correction and wireless correction when used with additional equipment

- InformaCast Compliant IP Clock with Speaker includes a 4ö Digital Clock and a 2Æ x 2Æ Lay-in Talkback Ceiling Speaker
- Only one network connection required
- Easy to read, high visibility Red digits display hours and minutes (4-digit display)
- Power over Ethernet (PoE) 802.3af compatible
- High Efficiency

- InformaCast Compliant IP Clock with Speaker includes a 12ö Analog Clock and a 2Æ x 2Æ Lay-in Ceiling Speaker
- Provides synchronized time, talkback intercom and loudspeaker paging from one IP network connection
- 12ö Analog Clock will sync itÆs time with the InformaCast server
- Enclosure is made of steel with a durable powder coated finish
- Color of the enclosure can easily be changed to match any decor
- Power is provided to both the clock and speaker via a Power over Ethernet (PoE) switch meeting the 802.3af specification
- Only one network connection required
- Low-profile/semi-flush smooth surface metal case
- Shatterproof, polycarbonate crystal
- Power over Ethernet (PoE) 802.3af compatible
- High Efficiency Speaker

- SIP Compatible
- Only one network connection required
- Power over Ethernet (PoE) 802.3af compatible
- High Efficiency Speaker

- InformaCast Compliant IP Clock with Speaker includes a 12ö Analog Clock and a Wall Mount Speaker
- Wall speaker is an 8ö interior talkback speaker
- Provides synchronized time, talkback intercom and loudspeaker paging from one IP network connection
- The 12ö Analog Clock will sync its time with the InformaCast Server
- The speaker enclosure is made of steel with a durable powder coated finish
- The color of the enclosure can be easily changed to match any dTcor
- A cloth covered detachable grille is included with the speaker
- Power is provided to both the clock and speaker via a Power over Ethernet (PoE) switch meeting the 802.3af specification
- SIP Compatible
- Only one network connection required
- Power over Ethernet (PoE) 802.3af compatible
- High Efficiency Speaker

- Valcom IP Clock
- 4 Digit digital readout
- 4 Inches
- Easy to install via RJ-45 connection
- IP ClocksPower over Ethernet (IEEE 802.3af)
- No master clock required - set automatically by NTP (Network Time Protocol)
- 10/100BaseT Ethernet compatible
- DHCP or static IP addressable
- Industrial grade metal housing

- Valcom 6 digit, 4 inch double sided digital PoE clock
- Easy to install via RJ45 connection
- Power over Ethernet (IEEE 802.3af)
- No master clock required set automatically by NTP (Network Time Protocol)
- 10/100BaseT Ethernet compatible
- DHCP or static IP addressable
- Industrial grade metal housing

- PoE (802.3af) - No Local Power Required
- 2.5

Special Order Drop Ship
12" Battery Operated Wireless Analog Clock and Repeater
Microprocessor-based movement
915-928MHz frequency-hopping technology
Receiving and transmission rate every 4 hours for battery operation
Automatic calibration

-Can act as a transmitter or repeater for Valcom wireless clock systems
TCP/IP network connection
Frequency tuning circuit to allow for time correction with changes in temperature
Field-enabled Daylight Savings Time (when used as a primary master clock)
Can act as an interface between existing systems to Valcom wireless systems
915-928 MHz frequency-hopping technology
Microprocessor based
Can transmit up to 2000 meters in open space
Loaded, half wave antenna
Input sensitivity: -103 dbm
Power output:30 dbm (1 watt)
Programmable relay output
Input for interfacing with other systems such as 59 minute correction, 58 minute correction, National Time and Rauland, Dukane, etc
LED display for a clear, accurate readout
Self testing mode allows the user to test the real time clock, output relay, LED segments, and inputs
Simple interactive menu system
Slim design makes the wireless transceiver versatile for mounting
Easy programming via two switches
Analog and digital wireless clocks can be mixed on the same system
Valcom digital input and output
LEDs for indication of transmission or receipt of Valcom digital signal (from the V-DCPI Digital Clock Protocol interface)
85-265 VAC input voltage making it accessible for American or European use
Transmits wireless signal every minute
Compact design makes the V-WMCA ideal for mounting is hallways
FCC approved, part 15 Section 15,247
Made in the USA